Color and Texture Selection
We agree on the color, gloss level, and surface type according to the intended use of the product and the desired appearance.
Powder Coating
Powder Coating of Metal
We provide powder coating for metal parts and structures, including surface preparation and application of a uniform protective decorative finish. The service can be ordered separately or as a final stage after metal structure manufacturing or metal turning . We coat parts, housings, profiles, and other metal products for both one-off and production orders.
Surface
preparation before coating
Uniform
powder coating
From 1 Part
to production batches
Metal
parts and structures
Protective
and decorative finish
Quality
control of the coating
Powder Coating in Ukraine
Powder coating is a modern way to protect metal products while giving them a clean, finished appearance. The coating withstands everyday use, protects the surface from moisture, corrosion, scratches, and chipping, and is suitable for everything from individual parts and housings to large metal structures.
Powder paint is applied to a prepared metal surface and then cured in a special oven, where it forms a strong, uniform layer. The result is a durable decorative finish in the required color and texture that maintains its appearance for a long time and does not require frequent refinishing.
Which Metals Are Suitable for Powder Coating
Steel is one of the most common materials used for powder coating. The coating helps protect the surface from corrosion and mechanical damage while also giving the product the required color and texture.
Typical products:
- Metal structures
- Frames and structural frameworks
- Brackets
- Housings
- Furniture components
Galvanized steel can be powder coated, but proper surface preparation is important for reliable coating adhesion. During heating, the zinc layer may release gases, so the preparation and curing process should take into account the type of galvanizing and the design of the product.
Typical products:
- Fencing
- Supports
- Outdoor structures
- Profiles
- Metal panels
Aluminum parts are well suited for powder coating. The coating provides a uniform decorative finish and adds extra surface protection during use.
Typical products:
- Aluminum profiles
- Housings
- Panels
- Frames
- Decorative elements
Stainless steel is powder coated when a specific color, matte or textured surface, or an additional decorative effect is required. Because of the smooth surface of the material, proper preparation before powder application is especially important.
Typical products:
- Housing components
- Panels
- Equipment components
- Decorative structures
- Furniture fittings
Cast iron and other cast metal parts can also be powder coated. Before coating, the surface is thoroughly cleaned and prepared, while possible outgassing from pores in the metal during heating must be taken into account because it can affect the quality of the finished surface.
Typical products:
- Housings
- Brackets
- Supports
- Cast machine parts
- Industrial equipment components
Copper and brass parts can also be coated with powder paints. Before coating, the surface is cleaned and prepared according to the material and coating requirements. This method is most commonly used for decorative, housing, and interior components.
Typical products:
- Decorative parts
- Fittings
- Housing components
- Panels
- Interior elements
Powder Coating: From Request to Finished Product
Quote Within 24 Hours
We calculate the cost and lead time based on dimensions, quantity, surface condition, and coating requirements.
Result Inspection
We inspect the surface after coating, including color, layer uniformity, curing quality, and the absence of visible defects.
Finished Products with Delivery
After the work is completed, we arrange packaging and delivery of the coated parts and structures throughout Ukraine.
Powder Coating: Project Examples
Examples of parts and metal structures after powder coating.
Threaded Bushing Ø40×115
Material: 6082 aluminum. CNC turning, powder coating. Batch — 50,000 pcs.
Brackets Made to Drawings
Material: sheet steel. Laser cutting, bending, powder coating. Batch — 8 pcs.
Support Assembly with Reinforcing Ribs
Material: 8 mm structural steel. Laser cutting, welding, powder coating. Batch — 15 pcs.
Protective Metal Enclosure
Material: steel. Yellow powder coating. Batch — 1,400 pcs.
Powder Coating of Metal: Frequently Asked Questions
The estimated cost of powder coating metal starts from 120 UAH/m² for simple products. For frames, grilles, profiles, and structures with complex geometry, the price may be significantly higher. The final cost depends on the surface area, dimensions, condition of the metal, required cleaning, powder type, color, and the number of items in the batch.
For smooth powder coatings, a typical thickness is around 60–80 μm. For matte, textured, and decorative coatings, the layer may be approximately 90–120 μm. The exact thickness depends on the type of powder coating and the requirements for the finished product.
Most standard powder coating systems are cured at a metal temperature of approximately 170–200 °C. Depending on the coating composition and temperature, the curing time is usually between 7 and 40 minutes. The exact curing conditions are specified in the powder manufacturer's technical documentation.
Powder coating is available in RAL colors as well as a variety of surface finishes, including gloss, semi-matte, matte, fine-textured, and coarse-textured finishes. Certain powders are also available with metallic, moiré, antique, and other decorative effects.
Yes, but products intended for outdoor use require powder coatings designed to withstand ultraviolet exposure and weather conditions. Polyester powder coatings are commonly used for these applications. Epoxy-polyester systems are more often used indoors.
Old coatings, rust, mill scale, oils, and other contaminants must be removed before powder coating. Surface preparation directly affects adhesion and coating service life, so heavily corroded or previously painted products require additional cleaning.
Related Services
Tell us about your project
Upload a drawing or 3D model and we will prepare an accurate quote. Or simply describe your requirements, and we will help you work out the details.
